BS En1335 Office Chair Seating and Back Rest Durability Lab Testing Equipment

Model NO.: TNJ-017
Size: 140X140X200cm
Seat Loading: up to 3000n (or Specified by Customer)
Backrest Loading: up to 1200n (or Specified by Customer)
Power: AC 220V 50Hz 5A
Trademark: Tony
Transport Package: Strong Wooden Case
Specification: QB/T2280 /GB 10357.3; EN 1728; EN 581-2
Origin: Dongguan China
HS Code: 9031809090
BS EN1335 Office Chair Seating and Back Rest Durability Lab Equipment
Model:TNJ-017
BS En1335 Office Chair Seating and Back Rest Durability Lab Testing Equipment
Description:
BS EN1335 Office Chair Seating and Back Rest Durability Lab Equipment  is used for testing the strength and durability of office chair. Made of Aluminum material frame, PLC contral, easy operation; high precision force sensor for the load application.
Seat and chair back durability combined tester.
 
Relevant parameters of BS EN1335 Office Chair Seating and Back Rest Durability Lab Equipment:
Seat Loading:up to 3000N (or specified by customer)
Backrest loading:up to 1200N (or specified by customer)
Seat sirface height:30~50cm
Loading cycle:0~999999 adjustable 
Loading force adjustment: Air pressure adjustment 
Motion control:PLC control
Backrest loading height: manual adjustment
Size:140x140x200cm
Air source:6kgf/cm^2 or above(supplied by customer themselves) 
Power:1∮AC 220V 50Hz 5A
Accessories: Seat loading pad 1 set; Back loading pad 1set;  Stationary fixture 1 set. 
Standards: QB/T2280 /GB 10357.3; EN 1728;  EN 581-2 and BS EN 1335.
BS En1335 Office Chair Seating and Back Rest Durability Lab Testing Equipment

BS En1335 Office Chair Seating and Back Rest Durability Lab Testing Equipment

BS En1335 Office Chair Seating and Back Rest Durability Lab Testing Equipment
Tests referenceWorking Principle: 
Staic tests: tests consisting of havy loads being applied a few times to ensure that furniture has sufficient strength under the highest levels of loading that might reasonably be expected to occur.
 
Fatigue test:Test simulating the repeated application of loads or movement of components occurring during long-term functional use.
 
This test appratus do the durability test to chair seat and backrest by simulating the loading application to the chair as daily use.First use the seat loading pad to apply the certain loading to the seat surface, then the back loading pad to the backrest, then loading unload to finish one cycle of test, repeat the loading movment some times and certian cycles according to different test requirement, to determin the durability permance of chairs. 
 Loading 600N on the seat surface,and then load 192N on the chair back
Repeated motion 200000 times in frequency of no more than 40times/min.
Office Chair Back durability tester come with aluminum frame,elegant appearance.
Pneumatic drive to load,easy to clean.
Base area: 1400mmx1400mm
Loading frequency no more than 40time/min
 

Other

Stone Diesel Engine Co., Ltd. , http://www.shdieselengine.com

Posted on