3D EPS Panel welding machineÂ production line
3D panel machine line introduction:
Â Featuresof the 3D Panel and eps board machine lines
3D panel production machine line
High automatic technology, low joint omitting rate, large joint strength, smooth quality prodÂ Â
|Rated electrical power||75KVA|
|Input voltage||AV380V 50Hz|
|Air sourcallocation||3 cubic meter/minÂ Â 0.6MPa|
|Applicable range||Core panel thickness||50mm-100mm|
|Truss wire configuration||Single or double sided mesh, different densities of truss wires|
|Production standard||Standard sandwich panel||length||3000mm|
|Nonstandard sandwich panel||The length according to your requirement â‰¤6000mm|
|Material characteristics||Welded wire material||2.0-3.0mm cold-drawing low-carbon steel wire|
|Core panel material||Anti-flaming EPS board &Â XPS board|
|Grid space of mesh||52mm*50mm(A-model) /Â
|Lacking welding rate||â‰¤5%|
|Welding strength||Single pointâ‰¥330N|
3D construction Panel and eps board machine lines
What is 3-D panel:
3d panel is aÂ prefabricated Three Dimensional Lightweight Structural panel consisting of aÂ super-insulated polystyrene core sandwiched between two engineered layers of 10 ga Steel welded wire fabric mesh. To complete the panel form process aÂ 10 ga Steel wire truss is pierced completely through the polystyrene core and welded to each of the outer layer sheets of 10 ga Steel welded wire fabric mesh.
-Fast High Quality Construction Time saved
50% faster than standard construction Speed, occupancy -Â Saves money on construction loan dollars
Due to easiness of installation, the terms are 10 times decreased!
-Enhanced resale and marketability value
-Reduces the need for heavy equipment on job fewer trades on job site.
-Strength Durability Greater Structural Integrity
-Monolithic design for superior Strength, Safety and Security
-Excellent performance in seismic zones (Earthquake Resistance)
-Noncombustible structure Savings of 18% to 30% on fire Insurance
-Excellent Hurricane protection-up to 225mph wind load
-Insect Termite Rodent Resistant to Mildew and Mold growth, fungi resistant.
3D panel is aÂ load bearing wall building material which adopts 3-dimension spatial steel wire mesh frame as the framework, anti-flaming polystyrene (EPS) foam panel or rock wool panel as heat protective core layer. External layer of the wall building material is sprayed with the pea gravel concrete or slush. It can be used to build the self-supporting house under the height of 10 meters according to the specifications constituted by the associated Chinese associated branches. According to US and European specifications, 3D panels can be exclusively used as the load bearing walls, the roof surface plates and floors of the self-supporting house under 7Â storeys.
The production line is composed of KY-1200-A welder, KY-1200 plane mesh welder, the steel wire rolling device, the steel wire bending device, the air compressor and purification plant and cement mortar spraying machine and so on. The micro-processor is used to control the whole production process of automatic wire feeding, welding and cutting and so on. Production capability per year can reach 450,000~600,000 m2. The touch screen of the liquid crystal display and the overhang frame integrated device are provided. Modular design is adopted for control unit. Multi-item self-test functions are provided. The equipment has good maintainability, stability and reliability.
Guarantee and after-service:
4. Door to door service can be provided.Â Â Â Â Â Â
5. We can according to your requirements production machinery
Q: Does your machine have CE certification?
A: Yes,our machine with CE certification.
Contact :Â larry
Tel :Â (+86)-311-86211202 Fax :Â (+86)-311-88632356
Yibo Machinery Co., Ltd. , http://www.zjrollformingmachine.com