45kw Water Type Mould Temperature Controller for Plastic Mould

  • Model NO.: MCTW
  • Heating Power: 3kw
  • Transport Package: Wooden Package
  • Origin: China
  • Control Temerature Range: Environment Temp. to 100 Centigrade
  • Trademark: SHICA
  • Specification: 650*340*580mm
Mould Temperature Controller 
 
FEATURES:
*The temperature control adopted Japanese. Germany,Taiwan.Precise and reliable,
  if can control within +- 1ºC and save electricity over 35%.
*Two sets of electric heater cylinder made from stainless steel.
*Emplaying supeb imported components,with longer terms of service.
*Rapid heating and cool off speeds,temp kept stable at times.
*Complete with safety protection and indication system.
*PLC control panel
 
Specifications Water Type Oil Type
Model MTCW-3 MTCW-6 MTCW-9 MTCW-12 MTCO-3 MTCO-6 MTCO-9 MTCO-12 MTCOH-6 MTCOH-12
Control Temp. Range Environment Temp. to 100ºC Environment Temp. to 160ºC Environment Temp.  to 200ºC
Voltage 3PHASE  380v   50Hz or 60Hz   3PHASE  380v   50Hz or 60Hz  
Cooling Methold Direct Cooling Indirect Cooling
Fluid Clean Water Heat Transfer Oil
Heating Capacity KW 3 6 9 12 3 6 9 12 6 12
Pump Power 0.375 0.375 0.375 0.75 0.375 0.375 0.375 0.75 0.375 0.75
Flow Volume(L/MIN) 80 80 80 110 60 60 60 90 60 90
Cooling Water Pipe/inch 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
Process Fluid Pipe/inch 1/2*4 1/2*4 1/2*6 1/2*8 1/2*4 1/2*4 1/2*6 1/2*8 1/2*4 1/2*8
Dimension L*W*H(mm) 650*340*580 650*340*580 650*340*580 750*400*700 650*340*580 650*340*580 750*400*700 750*400*700 650*340*580 750*400*700
Weight 54 54 72 90 58 58 75 95 58 75

Electric Rotary Hammer Drill

Rotary Hammer,Hammer Drill,Electric Rotary Hammer,Electric Rotary Hammer Drill

Goldsen International Trade Co., Ltd. , http://www.yypowertool.com

Posted on