Car maintenance and repair of winter five major parts of the maintenance skills


The cold winter has come to an end. How to maintain the car's winter has become a topic of concern for car owners. After the vehicle has passed the warranty period, some failures will inevitably occur. Automobiles need "three-point repairs, seven-point support," that is, through active inspection and maintenance, to identify and eliminate some initial, hidden, hidden faults. To make the car pass through the winter safely and year after year, it is necessary to do more than just take the car to the 4S store to replace the three filters, oil, antifreeze, and battery.... There are no fewer than a hundred things to do, and at least eight of them must not be forgotten.

1. Car paint protection In the early morning of winter, there is more dew, and the surface of the car is often very humid. If you have obvious scratches on the surface of your car, paint treatment should be done in time to avoid the dampness and corrosion of the scratched parts. In addition, due to the car In the summertime, you will be oxidized by rain and acid rain in the rain and direct sunlight in the summer. When the winter comes, you should do a cleaning, polishing and waxing of your car's surface. Glaze or coating a series of beauty treatments.

2. Tire maintenance Tire is the “foot” of a car. It plays a decisive role in driving a vehicle safely. In summer, due to high temperatures, the tire pressure must be checked regularly and the tire pressure must not be too high. Otherwise, there is a danger of puncture. In the winter, due to relatively low temperatures, tires should be replenished with air pressure to keep them within the specified air pressure range. At the same time, tires should also be inspected for scratches, because rubber tires tend to harden and appear brittle in autumn and winter. , Tires tend to leak, and even puncture, in addition, often need to clean up the inclusions inside the tread.

3. When the engine compartment enters winter, you should always check the engine compartment for oil, brake oil and antifreeze to see if the oil is sufficient, whether it is deteriorating, and whether it is in the replacement cycle. These fluids are like the blood of the car and go to the replacement cycle. Must be replaced to ensure smooth circulation of oil.

4. The brake system should always check whether the brakes are weak or running, whether there is any change in the pedaling force of the brake pedal, and if necessary, clean the piping part of the entire brake system.

5. Defrosting Vents When winter temperatures are low, white frost will appear. During this season, you must pay special attention to whether the air exit from the defroster vent under the windshield is normal and whether the heat reaches the defrosting standard. If problems occur, it is necessary to Solve it in time, otherwise it will bring insecurity to your driving.



The machine is used for cutting long tubes for scaffold vertical pole, after cutting the pipe ends with a smooth blade, without burr, which reduces manual grinding. It can load and unload the tube automatically, so it reduces work intensity.

Description of Pulley-clip scaffolding Cutting Machine

 

Advantage: no burr after cutting

Guarantee time: 1 year

MOQ: 1 set

OEM service: offered

Payment: T/T. L/C

Delivery: Tianjin port

 

 

FAQ:

Q: Can you customize the machine according to our workpiece requirement?

A:Yes, we can design the machine after you give us the technical drawing.

Q: How about payment terms?

A: 30% TT as deposit, 70% TT paid before shipment or against B/L copy.

Q: Installation and commissioning?

A: We will send our engineer for installation and commissioning

Q: Do you have some videos to show how the machine works?

A: Yes, we can provide some videos for reference.

 

Pulley-Clip Scaffolding Cutting Machine

Pulley-Clip Scaffolding Cutting Machine,Rotary Vertical Pipe Cutting Equipment,Rotary Vertical Pipe Cutting Machine,Rotary Scaffolding Vertical Pipe Cutter

RENQIU JINSHI WELDING MACHINE CO., LTD , http://www.scaffoldwelder.com

Posted on